車＆バイク
New Adjustable Car Dent Puller Dent Remover Auto Body Suction Cup Paintless Repair Tools Kit Auto Dent Removal Tool
starstarstarstarstar
starstarstarstarstar
GemScore™verifiedHigh Confidence
7.3/10
Recommended
starstarstarstarstar
starstarstarstarstar
local_fire_departmentlocal_fire_departmentlocal_fire_departmentlocal_fire_departmentlocal_fire_department
最良のエントリー価格
セールを見るarrow_forward¥1,553.00¥5,009.00
star4.6068件のレビューに基づく
timerセール終了まで--:--:--
lock安全な決済
local_shippingお届け迅速
undo返品無料
期間限定オファー
Check Price on AliExpressshopping_cart¥1,553.00
star4.6068件のレビューに基づく
verified確認済み価格
Amazonアソシエイトとして、適格購入から収益を得ています。
商品概要
Note:
1.This product without glue gun and glue stick.
2.This tool is made of fine quality material, it can remove dents from hail, other car doors and more.
Features:
Made of fine quality material, long-lasting to use.
Can help you repair the dents on your car.
It will not harm the painted surfaces.
Suitable for the sheet metal processing of automobile, refrigerator, motorcycle, washing machine, etc.
Specifications:
Item type: Dent Removal Tool
Material: plastics
Color: Gold
Package weight: 300g
Package size: 18 cm * 13.5 cm/7.09 inch * 5.31 inch
Package list:
1 * Dent Removal Tool
10 * Car dent repair tabs
How to use the tools ?
1. Clean damage surface with a clean wet cloth;
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes;
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);)(Note: The larger the drawing gasket is, the larger the drawing force is);
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
6. When dent was removal, clear the glue by alcohol with plastic shovel;
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head
8.Repeat the operation steps above until the dents are repaired.
1. Clean damage surface with a clean wet cloth;
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes;
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);)(Note: The larger the drawing gasket is, the larger the drawing force is);
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
6. When dent was removal, clear the glue by alcohol with plastic shovel;
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head
8.Repeat the operation steps above until the dents are repaired.
Question 1: The glue is not strong, the glue is debonded, what is the reason?
1. The viscosity of hot melt adhesive is related to the temperature. The ideal temperature is 20°C-28°C.
Note: Do not operate under the sun in summer, and the operating temperature in winter is above 10 ℃ (if the weather is very cold, you can first pour hot water on the wagon in the recess)
2. If the car has been waxed or plated with crystal film or the material of the recess is not iron sheet, the stickiness of the tape will be greatly affected.
3. It may be that the product is dusty during use. Before use, it is best to use alcohol to clean the rubber strip, the dent surface and the gasket.
4. If it is degummed during operation at ideal temperature, this is a normal phenomenon, and it only needs to repeat the operation.
If the depression cannot be repaired after repeated operations, it may be that the puller is not suitable for processing the depression. This is related to the shape, position and size of the depression. Not all depressions can be repaired with one product, which has nothing to do with the glue.
Question 2: How to remove the glue
You can use alcohol above 95 degrees, while tearing it again and spraying alcohol, the residual glue can be buttoned off with your fingernails. Asphalt, gasoline or diesel can also be used.
(Because alcohol is flammable and cannot be transported, please buy it locally. Sorry for the inconvenience caused.)
Note:
1. It is not recommended to use if the body has been waxed, there is a car coat, a film has been coated, or the paint surface is cracked.
2. The dent is not a metal sheet, or the dent is in a particularly hard place such as the body beam and cannot be repaired with tools.
主な仕様
技術仕様の詳細
OriginMainland China
Brand NameEAFC
Model NumberCar Body Dent Removal Tool
Package Width21 cm
Package Height16 cm
Package Length18 cm
Package Weight0.517 kg
Hign-concerned ChemicalNone
local_shippingEstimated delivery: 7 days (ship to JP)
storefront
EAFC Local Store
CN
star4.70
関連お得情報
Similar Products
Frequently Bought Together
mail
お得情報を見逃さない
最高の割引と専門家の厳選をお届けします。
何千人もの賢いショッパーに参加