TAMIYA Extra-Thin Cement TAM87038 Misc. Adhesives Fillers

Ensure the cap is sealed tightly immediately after each use. Store the bottle upright in a cool, dry place away from direct sunlight. If the brush tip dries out, it can sometimes be revived with a small amount of fresh cement or a compatible solvent.

No, our testing and user reports indicate that Tamiya Extra-Thin Cement does not work well on painted or chromed surfaces. It is designed to melt and bond bare plastic.

Extra-thin cement contains a stronger solvent that evaporates quickly and flows easily into seams via capillary action. Regular plastic cement is thicker, has a slower evaporation rate, and is generally more forgiving for applications where parts might not fit perfectly.

A weak bond is often due to applying too little cement, allowing it to evaporate before bonding, or not holding the pieces together long enough for the solvent to work. Ensure pieces are held firmly until cured.

While usable indoors, it emits strong fumes that can be overpowering. We recommend using it in a well-ventilated area, especially if you are sensitive to chemical odours or working in a shared living space.

The initial bond forms relatively quickly, often within seconds to minutes if applied correctly. However, for maximum strength and to avoid damaging the bond, it's best to allow parts to cure for at least an hour, and ideally 24 hours, before handling them roughly.

Use the included fine brush applicator for precision. Apply a small amount directly to the seam or edge of one part, then quickly press the parts together. Avoid excess application, which can cause unwanted seepage.

Some users suggest Tamiya Airbrush Cleaner is chemically similar and might be a cheaper alternative by volume. However, it may not offer the same viscosity or drying characteristics, and it lacks the dedicated brush applicator, potentially making application more difficult and less precise.